How many units is 50 mg of NAD+?

It depends entirely on how much water you added. In a 500 mg vial reconstituted with 2 mL, the concentration is 250 mg/mL, so 50 mg is 0.2 mL, which is 20 units on a U-100 insulin syringe. In the same vial with 1 mL of water it is 10 units, and with 3 mL it is 30 units.

How much bacteriostatic water for a 500 mg NAD+ vial?

2 mL is the usual choice. It gives 250 mg/mL, which puts the commonly reported range of 25 mg to 200 mg between roughly 10 and 80 units. Aim for a draw between about 10 and 50 units, where the barrel is easiest to read, and add or remove water to get there.

How many doses are in a 500 mg vial?

Divide 500 by your dose. At 50 mg that is 10 doses, which at once daily is 10 days.

How many units is 100 mg of NAD+?

In a 500 mg vial with 2 mL of water, 40 units on a U-100 syringe. In a 1,000 mg vial with 5 mL, 50 units.

NAD+ dosage calculator

In a 500 mg vial with 2 mL of water (250 mg/mL), 50 mg of NAD+ is 20 units on a U-100 insulin syringe. NAD+ is sold in 100 to 1,000 mg vials and dosed in tens of milligrams, so the numbers look nothing like a peptide.

Reviewed 3 September 2026
27 compounds
Formula on every page
No ads, no vendor links

Peptulator, peptulator.com. Research use only, not medical advice.

Free downloadThe Protocol Pack

25 printable pages: dosing cards for the twelve most-used compounds at three water volumes, titration planners, a vial log, and five pages on what to do when it has already gone wrong.

Dose to units at the usual vial and water

Dose	U-100 units	Draw	Doses per vial	Vial lasts
25 mg	10 units	0.1 mL	20	20 days
50 mg	20 units	0.2 mL	10	10 days
75 mg	30 units	0.3 mL	6	6 days
100 mg	40 units	0.4 mL	5	5 days
150 mg	60 units	0.6 mL	3	3 days
200 mg	80 units	0.8 mL	2	2 days

500 mg vial in 2 mL of bacteriostatic water (250 mg/mL), U-100 insulin syringe, once daily.

About NAD+

NAD+ is a coenzyme, not a peptide, but it is sold by the same vendors as a lyophilised powder for subcutaneous injection and the arithmetic is identical. It is not an approved injectable medicine. Flushing, nausea and injection-site pain are widely reported, and the pain is dose- and concentration-dependent.

A 500 mg vial with 2 mL of water is 250 mg/mL, so 50 mg is 0.2 mL, or 20 units. Because the site pain tracks concentration, some people reconstitute with more water and accept a larger draw. Commonly reported doses are 50 to 100 mg, daily or a few times a week, often starting lower.

The same 500 mg vial at other water volumes

If the draw is awkward to read, change the water, not the dose. The dose stays the same; only the mark moves.

Vial	BAC water	Concentration	Draw	U-100 units	Doses/vial
500 mg	1 mL	500 mg/mL	0.1 mL	10 units	10
500 mg	2 mL	250 mg/mL	0.2 mL	20 units	10
500 mg	3 mL	166.67 mg/mL	0.3 mL	30 units	10
1000 mg	1 mL	1000 mg/mL	0.05 mL	5 units	20
1000 mg	2 mL	500 mg/mL	0.1 mL	10 units	20
1000 mg	3 mL	333.33 mg/mL	0.15 mL	15 units	20

All rows above assume a 50 mg dose and a standard U-100 insulin syringe, where 100 units = 1 mL.

How long it lasts in the body

Cleared within minutes to hours; the injected molecule itself is not what persists. A decay curve is only drawn where a human half-life is documented, so there is none here. Treat any precise figure for NAD+ elsewhere with caution.

Common questions

How many units is 50 mg of NAD+?: It depends entirely on how much water you added. In a 500 mg vial reconstituted with 2 mL, the concentration is 250 mg/mL, so 50 mg is 0.2 mL, which is 20 units on a U-100 insulin syringe. In the same vial with 1 mL of water it is 10 units, and with 3 mL it is 30 units.
How much bacteriostatic water for a 500 mg NAD+ vial?: 2 mL is the usual choice. It gives 250 mg/mL, which puts the commonly reported range of 25 mg to 200 mg between roughly 10 and 80 units. Aim for a draw between about 10 and 50 units, where the barrel is easiest to read, and add or remove water to get there.
How many doses are in a 500 mg vial?: Divide 500 by your dose. At 50 mg that is 10 doses, which at once daily is 10 days.
How many units is 100 mg of NAD+?: In a 500 mg vial with 2 mL of water, 40 units on a U-100 syringe. In a 1,000 mg vial with 5 mL, 50 units.

IndependentThis site does not sell peptides and is not owned by a vendor.

The maths is openThe formula is on every page and in the methodology. The code is one file with an automated test suite, run before each deploy.

How it is fundedNo ads and no vendor links here. It is published by the team behind Peptide Bureau, which earns from affiliate links on its own site, and VialHaus, the same team's vial storage shop, which the storage notes link to.

ReviewedDose ranges and half-lives checked 3 September 2026.

Buying NAD+?

Peptulator does not list, rank or link vendors. Whoever the supplier is, use the strength printed on your own vial and check the batch certificate of analysis before you rely on any number here.

The NAD+ guideDosing, evidence and side effects, at Peptide Bureau Read a syringeU-100 vs U-40, and the 2.5x error Build a full protocolThe stack builder at Peptide Bureau, about two minutes

Common conversions

The same three-step maths, pre-filled for the doses people ask about most. Units on a U-100 insulin syringe, where 100 units is 1 mL.

mg to units calculator Any dose at any concentration, both directions, with the full reference tables
Units to mg calculator What the units you drew are in milligrams
1 mg to units The most-asked conversion, at every common setup
2 mg to units Retatrutide starting dose
2.5 mg to units Tirzepatide starting dose
5 mg to units Tirzepatide step two, MOTS-c, epitalon
10 mg to units Tirzepatide step four
12 mg to units Retatrutide top dose, tirzepatide 12.5 mg
15 mg to units Tirzepatide top dose

All calculators and charts

Weight management (GLP-1 family)

Retatrutide calculator Vial, water and weekly dose to syringe units
Tirzepatide calculator The 2.5 to 15 mg ladder, converted
Semaglutide calculator The 0.25 to 2.4 mg ladder, converted
Cagrilintide calculator Amylin analogue, 0.3 to 4.5 mg weekly

Growth hormone axis

HGH (somatropin) calculator IU vials to syringe units
Ipamorelin calculator mcg doses, in mL and units
CJC-1295 (no DAC) calculator No-DAC and DAC, mcg to units
CJC-1295 / Ipamorelin blend calculator The 5 mg + 5 mg blend, per component
Sermorelin calculator Nightly mcg doses to units
Tesamorelin calculator 1 to 2 mg daily, in units
Hexarelin calculator mcg doses to units
IGF-1 LR3 calculator Tens of mcg from very small vials
AOD-9604 calculator 300 mcg daily, in units
MOTS-c calculator 5 to 10 mg, two or three times a week

Repair, skin and blends

BPC-157 calculator mcg doses from a 5 or 10 mg vial
TB-500 calculator Loading and maintenance, in units
BPC-157 / TB-500 blend calculator The Wolverine stack, per component
GHK-Cu calculator 50 to 200 mg vials, mg doses
GLOW blend calculator The 70 mg blend, split per component
KLOW blend calculator The 80 mg blend, split per component

Other compounds

PT-141 calculator 0.5 to 2 mg, as needed
Melanotan II calculator mcg loading doses to units
NAD+ calculator (this page)
Thymosin alpha-1 calculator 1.6 mg twice weekly, in units
Epitalon calculator Short courses of 5 to 10 mg
Kisspeptin-10 calculator mcg doses to units
Glutathione calculator Hundreds of mg, or a 200 mg/mL solution

Dosage charts and schedules

Peptide reconstitution chart Concentration for every vial and water combination
Peptide dosing chart Printable unit tables for every compound
Retatrutide titration schedule 2 to 12 mg in units, stage by stage
Tirzepatide titration schedule 2.5 to 15 mg in units, stage by stage
Semaglutide titration schedule 0.25 to 2.4 mg in units, stage by stage
KLOW dosage and frequency chart The 80 mg blend at 2, 3 and 4 mL, both phases
GLOW dosage chart The 70 mg blend, units to each peptide
Wolverine stack dosing chart BPC-157 + TB-500, blend and separate vials
MOTS-c dosage chart 5 and 10 mg vials at three water volumes
Tirzepatide reconstitution chart Every vial size, every water volume, the whole ladder
Retatrutide dosing chart 1 to 12 mg across 10, 20 and 30 mg vials
Tirzepatide units to mg chart Both directions, every vial and water volume
Semaglutide units to mg chart The dosage chart in units, both directions
NAD+ injection dosage chart Per day, per week and frequency, 100 to 1,000 mg vials
Tesamorelin dosage chart 2, 5 and 10 mg vials, 0.5 to 2 mg in units
BPC-157 dosage chart mcg doses from 5 and 10 mg vials, four water volumes
PT-141 dosage chart The 10 mg vial, 0.5 to 2 mg, with uses per vial
Sermorelin dosage chart Nightly mcg doses from 5, 10 and 15 mg vials
Printable dosing charts Four one-page charts to save, pin or print
Peptide storage chart How long powder and mixed vials last, fridge to freezer

Tools

Peptide calculator The general tool, any compound
Reconstitution calculator How much water to add, and why it matters
Bacteriostatic water calculator Pick a volume that lands where you can read it
How to read an insulin syringe U-100 vs U-40, and the 2.5x error
The Protocol Pack Free 25-page printable reference
mg to units calculator Both directions, any concentration, with the reference tables
1 mg to units on an insulin syringe The conversion table for every common concentration
Units to mg calculator The mark you drew, back into milligrams
2 mg to units on an insulin syringe 2 mg at every common vial and water volume
2.5 mg to units on an insulin syringe 2.5 mg at every common vial and water volume
5 mg to units on an insulin syringe 5 mg at every common vial and water volume
10 mg to units on an insulin syringe 10 mg at every common vial and water volume
12 mg to units on an insulin syringe 12 mg at every common vial and water volume
15 mg to units on an insulin syringe 15 mg at every common vial and water volume
Methodology Every formula, assumption and rounding rule
About Peptulator Who publishes it, independence and contact
Embed the calculator One line of HTML, free, credit line only

Before you use these numbers This is a unit-conversion tool. It turns a vial strength and a water volume into a concentration, a draw volume and a syringe mark. It does not tell you what to take, whether to take it, or whether a compound is safe for you. Most compounds listed are sold for laboratory research and are not approved for human use. Nothing here is medical advice. Dosing decisions belong with a licensed clinician who knows your history. Always check the strength printed on your own vial rather than trusting a preset.